FEULING PARTS Camchest Kit - 487 - Chain Drive - Water Cooled - Race Series Lifters - M8 - Harley-Davidson '17-'25 - 7273
🚚 Estimated Delivery: 26 Aug - 02 Sep
CONFIRM FITMENT BEFORE ORDERING
Please confirm fitment for your bike below as we do not accept returns on parts ordered incorrectly.
- 487 Reaper® Chain Drive Camshaft, Cam Installation Kit, Race Series® Lifters, One Piece Pushrod, Race Series® Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit
487 Reaper Camshaft
- Bolt-in
- Chain Drive
- Camshaft for 114" and 117" engine
- Responds very well to increased bore and or compression
- Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
- RPM range 2,250 - 6,100
- Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
Cam Installation Kit
- Includes cam bearing, cam/crank hardware and gasket/O-ring kit
Race Series® Lifters
- Hydraulic roller lifters, standard OD (0.8420-0.8423)
- Hydraulic lifters have a full .200 of total travel designed with a slower bleed down rate to handle heavy valve spring pressures
One Piece Pushrods
- Heavy duty 7/16 diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish
Race Series® Oil Pump
- Increase oil pressure, scavenge volume and engine oil flow
- 30% more pressure gear volume over stock
- 53% more scavenge gear volume over stock
- 42% more scavenge volume with port sizing, matched passages and holes to the engine case
- 46% more oil volume to the crankshaft and connecting rod bearing
- 15°- 25° cooler engine temperatures
- 15°- 30° cooler oil temperatures
- 10-30 more PSI of oil pressure
- Reduces wet sumping, blow by and oily air cleaners
- Magnets in oil pump to help protect gears and pressure relief valve
- Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque are achieved.
- FEULING test results show a 50% reduction of engine sump oil level
High Flow Camplate
- Billet 7075 aluminum
- Bolts into stock location
- Made in the USA
- Feuling does not recommend tuning beyond stock emissions standards.
NOTE:
Not for VVT water cooled engines.
Kit Includes:
• 487 Reaper Chain Drive Camshaft
• Cam Installation Kit
• Race Series® Lifters
• One Piece HP+® Pushrods
• Race Series® Oil Pump
• High Flow Camplate
• ARP Rocker Studs and Nuts
• Camplate/Oil Pump Fasteners
Fitment Guide
| 2025 | Harley-Davidson | Road Glide Custom FLTRX | - | - |
| 2025 | Harley-Davidson | FLTRXRRSE CVO Road Glide RR | - | - |
| 2024-2025 | Harley-Davidson | FLTRXSTSE CVO Road Glide ST | - | - |
| 2024-2025 | Harley-Davidson | Road Glide Police FLTRXP | - | - |
| 2023-2025 | Harley-Davidson | FLTRX Road Glide | - | - |
| 2022 | Harley-Davidson | FLTRKSE CVO Road Glide Limited | - | - |
| 2020-2022 | Harley-Davidson | FLHTCUTGSE CVO Tri Glide | - | - |
| 2018-2022 | Harley-Davidson | FLTRXSE CVO Road Glide | - | - |
| 2017-2025 | Harley-Davidson | FLHTCUTG Tri Glide Ultra | - | - |
| 2017-2024 | Harley-Davidson | FLHTK Ultra Limited | - | - |
| 2017-2022 | Harley-Davidson | FLHXSE CVO Street Glide | - | - |
| 2017-2021 | Harley-Davidson | FLHTKSE CVO Limited | - | - |
| 2017-2019 | Harley-Davidson | FLHTKL Ultra Limited Low | - | - |
| 2017-2019 | Harley-Davidson | FLTRU Road Glide Ultra | - | - |
Specs
| Exhaust Lift | 0.487" |
| Intake Close | 37° |
| Riding Style | Street |
| Intake Lift at TDC | 0.180" |
| Intake Open | 20.5° |
| Exhaust Lift at TDC | 0.146" |
| Product Name | Camchest Kit |
| Application | Water Cooled |
| Exhaust Duration | 241.5° |
| Exhaust Open | 44° |
| Grind | 487 Series |
| Intake Lobe Centerline | 98.5° |
| Model | Reaper |
| Exhaust Lobe Centerline | 103.25° |
| Intake Lift | 0.478" |
| Exhaust Close | 17.5° |
| Intake Duration | 237° |
| Type | Chain Drive |
| Units | Kit |
Delivery Info
Please Note - Warehouse Locations For This Part -
FEULING PARTS Camchest Kit - 487 - Chain Drive - Water Cooled - Race Series Lifters - M8 - Harley-Davidson '17-'25 - 7273
Gold Coast Warehouse- If your parts are in stock at our Gold Coast warehouse at the time of order, they will be shipped within 24hrs.
Supplier Warehouse - 2-3 Week Delivery- If your parts are located at our Supplier Warehouse, Delivery ETA is approx 2-3 weeks, as the parts are likely coming from our USA supplier warehouse. We will notify you once we receive it in Gold Coast warehouse and its on its way to you.